Loading...

Autohex II BMW Full Package - MICROTRONIK

SKU: KC-AHX0005
by MICROTRONIK
$5,850.00

Autohex II BMW Full Package - MICROTRONIK

Siutable for: BMW Technicians who are looking for a tool that can do everything possible in BMW cars

Autohex II HW4 and full functions available in BMW from ISN read write to key programming and BMW Ecu programming and coding

Using this kit you can do following:

  • Read old ISN in BMW E series for following Ecus:D62M57A0,  D62M57B0,  D60PSA0,  D50M57A0,  D50M57E1,  D60M47A0,  D60M57A0,  MEV9N46L,  ME9N45,  ME9N62,  ME9E65_6,  N73_L0,  N73_R0,  ME9N62_2,  MSV70,  MS450DS0,  N62_TUE,  N62_TUE2.
  • Read Long ISN (SK) in BMW E series from following Ecus:  MSV80,  MSD80,  MSD81,  MSD85,  MSD85Y,  MSS60,  MEVD176K,  ME17N45,  MED17_2,  MED17_2N,  MEV17_2,  MEV17N46,  MEVD174K, MEVD174KW,  MV1722,  MVD1722,  MEVD172,  MEVD1724,  MEVD1725,  MEVD172Y,  MEVD17KW,  D70N47A0,  D70N47B0,  D71N47A0,  D71N47B0,  D71N47C0,  D71N47D0,  D72N47A0,  D72N47B0,  D73N47A0,  D73N57A0,  D73N57B0,  D73N57C0,  D73N57D0
  • Read Long ISN (SK) in BMW F series from following Ecus: MEVD172Y,  MEVD172,  MEVD1724,  MEVD1725,  N63TU_L0,  N63TU_R0,  S63TU_L0,  S63TU_R0
  • ISN Reading from Tricore Ecus by boot mode.
  • Indivedual Programming for any Ecu in BMW E and F series
  • Ecu Swapping if hardware is matched.
  • CAS1, CAS2, CAS3 and CAS3+ read and write ISN and SK
  • Key Programming For E and F series (CAS1, CAS2, CAS3, CAS3+, CAS4 ,CAS4+)
  • BMW E series EGS ISN matching with CAS
  • BMW F series EGS 8HP EWS Resetting
  • BMW E and F series coding for all Ecus (calculation of Ecucoding is calculated from FA)
  • BMW advanced coding (manual coding)
  • Vehicle order modification and backup and restore from LM,FRM,...ETC
  • Do diagnose and service functions from Autohex II (Read and erase fault codes, data stream values, activations, reset adaptation,...)
  • Use BMW ISTA-D on Autohex II WVCI (BMW ISTA-D Driver)
  • Unlock secrity of BDC and FEM to able to: Change BDC and FEM VIN, Change BDC and FEM ISN, Mileage Reset for BDC and FEM, and making a key for BDC and FEM.

What you get:

  • Autohex II Hardware WVCI HW 4
  • HTag Pro Key programmer
  • BMW Software Standard License
  • ISN Boot Mode License
  • BMW Ecu Programming License
  • BMW Key Programming License
  • BMW ISTA/D driver to run dealer software
  • 1 year technical support
  • 1 year hardware warranty
  • 1 year online access to online programming

After a year you will have to renew your license to keep online functions.
You can still use your interface as normal (Except online functions)